Cabri 3000 - Cloakroom lockers

The cloakroom lockers of the CABRI3000 system are available as standard in either one, two, three or four storey versions. All other partitions are possible. The length of the rows of lockers is unlimited. Single rows of lockers are screwed onto the wall at the back, whereas two-row arrangements are fitted free-standing on a base to be supplied by the customer. These lockers are continuously ventilated by means of slotted openings in the floor, intermediate floors and top. The doors can be equipped with all possible lock systems.

Cloakroom lockers

One, two, three, four storey

Tender specification texts

A Heights 1,500 mm, 1,700 mm, 1,800 mm
B Depth - single row 500 mm
C Depth - double row 1,000 mm
D Widths 250 mm, 300 mm, 400 mm
E Length = Number of lockers x width + 20 mm (2 side walls)

Floor with walls of sheet aluminium

Floor Made of plastic, compressed with walls of sheet aluminium. Back bent with a radius of approx. 30 mm (easier to clean as no corners).

Floor with ventilation

Floor Made of plastic, compressed designed in such a way that a ventilation slot of locker. Shoe rack inclined at an angle of 5% to allow water to run off.

Cabrillant is often the first choice in wet areas and hygienically challenging properties. Glass is easy to clean. Enamelled and toughened safety glass is capable of satisfying the most demanding mechanical and hygienic requirements. The enamel layer fused with the glass on one side is scratchproof. Any graffiti applied by vandals using marker pens or spray paints can be easily removed leaving no residue. The non-porous surface is impervious to dirt and bacteria and has no joints or corners where dirt can build up.

The toughened safety glass used (ESG as per EN 12150-2) is strong and long-lasting, yet the wall thicknesses can be as little as 10 mm. Glass sections can also be manufactured from laminated safety glass (LSG). We offer a selection of 10 standard colours, but others are available on request.